This is the RPM Black True-Track Rear A-Arm Conversion for the Traxxas T-Maxx 2.5R, T-Maxx 3.3, and E-Maxx 16.8.

The RPM Hoss/Rustler 4X4 Rear Shock Tower is based on the proven RPM Traxxas Slash 4x4 shock tower and incorporates the required area to allow for the clipless body mounting system.

RPM's rear bearing carrier version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly.

RPM rear shock towers for the electric versions of the Stampede, Rustler, Slash & Bandit were designed with one thing in mind rugged durability.

When a stock skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck.

This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede.

Hot Racing aluminum front upper arm mount and carbon fiber front shock tower and adjustable shock positions for the 1/6 Losi Super Baja Rey

Hot Racing aluminum front steering spindles (i. e. steering knuckles) with carbon fiber steering arms and oversized bearings for the 1/6 Losi Super Baja Rey

The Hot Racing Losi Super Baja Rey Aluminum Large Scale Clamping Servo Arm is an aluminum 15T Servo Arm upgrade that will fit the stock S904 servo included with the Losi Super Baja Rey/Super Rock Rey models.

Receiver (Flysky FS-A3) (Compatible with RCR-2CENR radio)

This is the Spektrum RC SR6200A 6-Channel 2.4GHz DSMR Surface Receiver with Telemetry & AVC.

SR6110AT 6ch AVC/Tele Surf RX 6-channel DSMR / DSM2 receiver Full-range telemetry capabilities with Spektrum Firma Smart ESC