This is a pair of replacement drive yokes for the Traxxas Revo. These yokes attach to the half shaft assemblies.

Traxxas pair of stub axle steel for the Revo (2). Pair of replacement stub axles for the Traxxas Revo. ; The wheels attach to the axles. ; Steel construction.

These are the center half shafts for the Traxxas Revo 3.3.

Traxxas brake yoke with pins for the Revo. It is for use on the center/front driveshaft assembly. Plastic brake yoke. Steel Brake Pins (each knurled on one end) Steel Screw Pins.

These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3. Features: Black plastic construction Includes: Two drive yokes Two 4x15mm Yoke pins Requires: T-Maxx 3.3 Specs: Length: 15/16 (23mm) Diameter: 3/4 (17mm)

This is the optional variable damping kit for GTR shocks found on the Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR.

This is a rod end set for the Traxxas Revo used with the optional GTR shocks. Specs: Length: 18.35mm (0.72) Width at ball joint: 10.35mm (0.40)

This is the optional assembled wheelie bar for all versions of the Traxxas Revo except the 1/16 E-Revo.

This 34T Mod1 Spool Gear allows you to fine tune the gearing of your vehicle

Traxxas half shaft set Left or Right for the Revo. Replacement Half Shaft Set for the Traxxas Revo Truck.

Traxxas Hardened Steel Mod 1.0 Pinion Gear. This durable hardened steel pinion gear has a 5mm bore and a Mod 1 tooth pitch, making it compatible with a variety of applications.

Traxxas spring shock GTR 4.1 rate tan for the Revo. Green tension shock spring set for the Revo GTR Shocks. These springs are installed on the shock bodies.