Traxxas 20 Tooth replacement clutch bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.

This is a replacement brake disk with adapter from Traxxas. The brake disk mounts with the adapter on the transmission input shaft.

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

This is a Traxxas Steel 54-Tooth, 0.8 Metric Pitch (32-Pitch Compatible) Center Differential Spur Gear.

This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch bell on the engine into the transmission case.

This is the Traxxas 6400mAh 11.1V 3C 25C LiPo with Auto Battery iD TRA2857X.

This is a Spektrum IC3 Parallel Battery Y-Harness with 6" (150mm) of 13AWG Wire.

Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

This is the Arrma IC5 Loop Connector for use with models that use two IC5 or EC5 connectors. It allows the use of a 4S or 6S LiPo battery pack in your vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery

This is a 1900kv XeRun XR8 PRO G2 ESC & 4268 G3 motor by Hobbywing.

This is one 15cm (6") universal servo extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength.

PowerHobby 102MM Double Row 32 LED Lightbar w/ Controller for 1/10 1/8